Re: [FWDLK] Door/Window handle Tool
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Door/Window handle Tool



It's hard to find the original tool.  The 57-58 Ply shop manual (maybe the
56 as well?) has an illustration of how to fabricate one out of sheet metal.
I took the illustration to a sheet metal fabricator and he made me the tool
for about $20.  Works pretty well.

Ron

-----Original Message-----
From: joe frega <joefrega@xxxxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx <L-FORWARDLOOK@xxxxxxxxxxxxx>
Date: Saturday, March 20, 1999 3:34 PM
Subject: [FWDLK] Door/Window handle Tool


>Hi to all,
>
>Being pretty new to this, I'm sure this is a stupid question (unless
>you believe that there are no stupid questions).
>
>Can anyone tell me where to locate the tool to remove the inside
>handles on a 56 Belvedere?  I can't find any in the common parts
>books/suppliers catelogs.  A picture with dimensions is shown in the
>service manual and I guess one could be made - but I figured that I
>could buy one someplace!
>
>I've tried various pry bars, shims, etc., without much success (unless
>you call messing up the washer and upholstery  sucessful).
>
>Any help??   Thanks in advance.
>
>Joe and Jason
>56 Belvedere
>_________________________________________________________
>DO YOU YAHOO!?
>Get your free @yahoo.com address at http://mail.yahoo.com




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.