RE: [Chrysler300] Re: Question about my 1964 - Chry K--trunion drive shaft--BOOT

["David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>]

Always check the club site for info first

Mark Sherman, club member has new boot kits
He has an add on the club classified section of the web site
Be sure to install it correctly as per service manual instructions.

BY ALL MEAS   DO NOT REMOVE THE PRESSED IN PIN FROM THE ASSLY IN ORDER TO REPLACE THE BOOT
As it requires a special assly jig to re-install

Dave Schwandt


-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of David
Sent: Friday, June 29, 2012 10:06 PM
To: waldor@xxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Re: Question about my 1964 - Chry K--trunion drive shaft--BOOT

Hi Walt,
At my mechanic's advice, I ordered the same trunion boot from the eBay seller:
http://www.ebay.com/itm/1953-1965-Chrysler-Desoto-Dodge-Plymouth-trunion-universal-joint-boot-Mopar-new-/290729927331?_trksid=p4340.m1850&_trkparms=aid%3D222001%26algo%3DSIC.CURRENT%26ao%3D1%26asc%3D11%26meid%3D267270593667000326%26pid%3D100011%26prg%3D1005%26rk%3D1%26

The gentleman taking care of my K Ram convt and L convt knows what he's doing so if the part is good enough for him it is certainly up to the task for me. 


300KL'y,

David Morrison
Radnor, Pennsylvania



________________________________
 From: "waldor@xxxxxxx" <waldor@xxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx 
Sent: Friday, June 29, 2012 10:54 PM
Subject: [Chrysler300] Re:   Question about my 1964 - Chry K--trunion drive shaft--BOOT
 

  
Hi Guys --Put the car up on the ramps couple days ago and noticed a 
small trail of grease [ on the under side of the tunnel]-- that had 
been flying off the boot [ or  loose clamp]-- Can some one tell me 
where the club members would get one---[   AS there is one --with 
clamps on EBAY for $39 .]--[ AND  I DON'T want to  drive it till I fix 
the boot and get some grease in it]---
--
-
---------  Thanks for now --
Walt Reinecker
Stratford Ontario  Canada

------ waldor@xxxxxxx

 

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links






------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/