Re: {Chrysler 300} Dynamat

["'Charlie V' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I asked Ryan at Eastwood and he said while it will be difficult to remove it can be done.

Scrap it the best you can.

Use a solvent on what remains and scrap again. Wear a respirator.

Eastwoods SCT with the wire brush wheel should also do a fine job at removing what's left after the initial scraping. This would probably be the quickest method but the tool is not cheap. Again wear a respirator.

After scraping it the best you can a propane torch could be used. This may be easier than the other methods but you better be extremely careful. I will not recommend this method because I do not want to be liable in case you burn up your car, burn down the garage , harm yourself or even worse.

Charlie

 

On Monday, November 16, 2020, 11:13:03 PM EST, Ryan Hill <ryan_hillc300@xxxxxxxxxxx> wrote:

Any information regarding the performance of these products (comparatively) and the ease or difficulty in removing them afterward would be appreciated. Thanks Charlie!

Ryan Hill

---

From: 'Charlie V' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: November 16, 2020 4:54 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Dynamat

 

I work at Eastwood and we sell Eastwoods " XMAT" and we also sell Dynamat and Hushmat.

Overall the positive comments on our XMAT are very good.

I am not sure how easy, or difficult,  it is to remove but I can find out.

Charlie Valentine

On Sunday, November 15, 2020, 09:39:04 PM EST, Ryan Hill <ryan_hillc300@xxxxxxxxxxx> wrote:

I’ve been tempted to try these products myself. My concern has been whether or not it could ever be removed if needed....it seems like once it’s down, it’s down forever? Am I wrong?

Ryan Hill

On Nov 15, 2020, at 4:18 PM, Keith Boonstra <kboonstra@xxxxxxxxxxxx> wrote:

I have used the sound deadener material (I do not remember the brands) on at least three of my restoration projects. The pros are most certainly there, and I can’t think of a downside at all.

Keith Boonstra

-

On Sun, Nov 15, 2020 at 12:27 PM Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:

Hello, everyone:

Looking for some input on Dynamat sound deadeners. Any pros or cons?

Best,
Ron Kurtz
E #292

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/569195517.5622719.1605461224061%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CABYqBVqW7zeKZ8k%3Dus1McCiakVDzE7oMOMLCsChTjPznv0%2BM%3DA%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/MW3PR16MB3932C16D80C60AF8F6A0693AC5E30%40MW3PR16MB3932.namprd16.prod.outlook.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/671554306.6323420.1605574486494%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/MW3PR16MB393206269888DAA0090A02D8C5E20%40MW3PR16MB3932.namprd16.prod.outlook.com.

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1297064303.6948959.1605694635050%40mail.yahoo.com.