RE: {Chrysler 300} Rear brake proportioning valve

["'James Douglas' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Zach,

Suggest you rear the following:

https://shop.wilwood.com/blogs/news/how-does-a-proportioning-valve-work

James

-----Original Message-----
From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Zach Hietsch
Sent: Sunday, May 12, 2024 10:05
To: Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Rear brake proportioning valve

Hello All,

I am finishing up the brake lines for my conversion to front disks. My kit from AAJ brakes came with a prop valve for the rears. 

Should I install it and if I do what is the correct procedure for setting it. 

I have found a lot of different ways to do it and I am unsure on which one I should follow. 

Thanks
Zach Hietsch

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/516BD6D6-393B-4DDE-9AC2-CB1848F52550%40gmail.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61715C95F2A4DA15F0AE8D2D93E12%40CY5PR19MB6171.namprd19.prod.outlook.com.