Danny – No gasket. But there are tiny rubber seals between the hex adjusters and the backing plate on the inside, in order to keep anything splashed onto the backing plates from entering the assembly. Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx Folks: In mid assembly of stock 300 F front drum brakes. Is there a gasket between the backing plate and spindle? Where can I get a proper set of fresh lug nuts 5 with LH threads? Danny Plotkin -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001901dc0c90%246cd69b60%244683d220%24%40comcast.net. |
Back to the Home of the Forward Look Network
Archive Sitemap