Re: {Chrysler 300} 300 F backing plate & lug nuts

I seem to remember hearing that regarding Ford/Chrysler rim compatibility. Bolt pattern is the same, but the bevel is different, which could lead to lug nuts coming loose if not matched to the wheel itself.

On Fri, Aug 15, 2025 at 1:30 AM Rich Barber <c300@xxxxxxx> wrote:

I recall bevel angle is different between makes. Lug nut taper should match the bevel in the wheel.

Rich B.

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx
Sent: Thursday, August 14, 2025 5:57 AM
To: dave mason <forwardlook300@xxxxxxxxx>
Cc: Ron Waters <ronbo97@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} 300 F backing plate & lug nuts

Thank you dave, that is what I was looking for.

Danny Plotkin
-----Original Message-----
From: "dave mason" <forwardlook300@xxxxxxxxx>
Sent: Thursday, August 14, 2025 1:03am
To: dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx
Cc: "Ron Waters" <ronbo97@xxxxxxxxxxx>, chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} 300 F backing plate & lug nuts
Danny,
As one option, Napa carries both RH and LH,

P/N’s

641-2026
641-2027

D&K
Sent from my iPhone

On Aug 13, 2025, at 17:33, dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx wrote:
My adjusters are OK. I want to replace all 20 lug nuts. Mine are a mix of originals and who knows what. Where would you go for 10 LH & 10 RH?

Danny Plotkin
-----Original Message-----
From: "'Ron Waters' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, August 13, 2025 5:08pm
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: RE: {Chrysler 300} 300 F backing plate & lug nuts
If there is a stripped adjuster, then the eccentric cam is probably frozen. So I would opt for finding a center support in better condition.

Ron

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of John Grady
Sent: Wednesday, August 13, 2025 4:36 PM
To: Ron Waters <ronbo97@xxxxxxxxxxx>
Cc: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} 300 F backing plate & lug nuts

see also the tech note about welding nuts to stripped hex adjusters . huge difference!

On Aug 13, 2025, at 4:25 PM, 'Ron Waters' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Danny –

No gasket. But there are tiny rubber seals between the hex adjusters and the backing plate on the inside, in order to keep anything splashed onto the backing plates from entering the assembly.

Ron

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, August 13, 2025 4:09 PM
To: chrysler 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 300 F backing plate & lug nuts

Folks:
In mid assembly of stock 300 F front drum brakes. Is there a gasket between the backing plate and spindle? Where can I get a proper set of fresh lug nuts 5 with LH threads?

Danny Plotkin
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1755115765.22059160%40apps.rackspace.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001901dc0c90%246cd69b60%244683d220%24%40comcast.net.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/186846F8-BF40-4DA1-A06B-629EA708031C%40gradyresearch.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/002201dc0c96%247b12f560%247138e020%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1755120831.379119184%40apps.rackspace.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1755176208.16933550%40apps.rackspace.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/001a01dc0dae%2407539120%2415fab360%24%40ez2.net.