{Chrysler 300} 64 Bendix power booster

[David Dumais <ddume300@xxxxxxxxx>]

May need input,please.

We completed installation of wheel cylinders and bled system twice.

Brake pedal very good. Until I started the engine.

The brakes went to the floor!    I blooded of the vacuum hose and the brakes were back up.

The drums were set at zeroe notches, somehow the brakes stayed on after offing the engine.

I will disconnect new master from booster and hope brakes will free up.

I'm guessing this is a faulty booster.  About 30 years old.

Any previous issues like this from Club members?

Thanks

Dave D

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAJp4EVEv0M3XWjRj3-_7Db9zF5YZxgirSFbgZYOeOuqi-uKwhQ%40mail.gmail.com.