Re: {Chrysler 300} 1962 Distributor Cap, in black

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

Aluminum distributor is Chrysler, cast iron is Autolite/Prestolite. 

On Fri, Sep 19, 2025, 2:15 PM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hello All!

I am dreaming of a simple black distributor cap; which I have been able to get in the past.

Maybe I am not looking hard enough.

I ordered a cap from Napa (p/n ECH AL129).

It was black, but wrong for my distributor.

Assume it is for an Auto Lite & I must have a Chrysler distributor.

So I took it back & ordered another one (p/n MPE MO20SB).

It is correct for my distributor, yet it is dark grey; not black.

Anyone have a source I should go after next?

(I miss the days of parts stores have enough stock on the shelves to choose from)

Thanks

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/B6DCE24E-FEE2-4271-B492-0CB6EA726FC6%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFN9MGQHVVfMsTSmCwS3%3D5zOkFZzg9NKsj0H51K4Y2kw_Q%40mail.gmail.com.