RE: {Chrysler 300} Pertronix in a ‘62

["dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx" <dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Matt:

Identify your Pertronix module and look for its installation instructions on line which should be easy to do. Discussions about the travails of Pertronix use are prevalent on a Corvette forum I frequent. Many run into trouble with the ballast in the circuit feeding the gadget. You must follow their wiring instructions. 

 

Even then I would keep a spare gizmo or a set of points, condenser and mounting screws in the glove box.

 

Danny Plotkin

-----Original Message-----
From: "'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Sunday, September 21, 2025 4:31pm
To: "Chrysler 300 List" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Pertronix in a ‘62

I have forgotten too much since I pulled the motor….

Wire coming off the left side of the ballast resistor attaches to the positive side of the coil?

Then another wire, positive side too, feeds down to the distributor attaching to the pertronix module?

Then negative side of the coil feeds into the distributor also?

Thanks

Matt Allyn

(562) 533-2551

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/13373763.6044444.1758486673326%40mail.yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1758497316.541541914%40apps.rackspace.com.