Re: {Chrysler 300} New 300J video on YouTube

[Jeff Biltz <jrbiltz@xxxxxxxxxxx>]

Hi everyone! I’m replacing the vacuum advance I’m my K and managed to lose the snap-in washer that holds the arm of the vacuum advance in place. The closest I could find was a 3/8” one with a 1/8” inner diameter. It is slightly too big to snap in. Does anyone know what size the actual washer is, and where I might get one, or four. 😃Thanks!!

Get Outlook for iOS

---

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Carl Bilter <cbilter@xxxxxxxxx>
Sent: Sunday, October 12, 2025 4:18:09 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} New 300J video on YouTube

 

From the Dead Dodge Garage channel, a new 300J video:

A Beautiful Brute - 1963 Chrysler 300J Revival, Tuning Tech, And More (Plus Bonus Mopar Revivals)

Carl B.  

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/emd2a2aebb-c0b7-4837-86a5-7625f1f7aa60%408d3cef29.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/PH7PR11MB669717677A70500FE710BD5ABEEDA%40PH7PR11MB6697.namprd11.prod.outlook.com.