[Chrysler300] power antenna question / other stuff

[John Hertog <crossram@xxxxxxxxxxxxx>]

First question re: 300F/G type power antenna : I am stumped as far as
removing such an antenna from a vehicle, where it has been installed since
new.  There are two small holes on the outer/top chrome threaded collar,
where a "special tool" is supposed to fit.  Problems are, I don't have the
"special tool" and also, there is little if no clearance between one of the
little holes and the rear fin.

Other than demolishing the top/outer chrome collar, is there a solution?
Any attempt at inserting a roll pin punch of the appropriate size into the
one accessible hole, and then exerting sideways pressure, will demolish the
little hole and render the outer/top chrome piece useless.  And those are
pretty much unavailable, as far as I know. I'd hate to have to wreck it.
Also, there is no way to squirt rust penetrant in there.

2nd question:  I am restoring a 1962 NewYorker wagon.  Anyone out there in
300 land have a '62 NewYorker 4 door hardtop parts car, please e-mail me
privately - I need a few doodads...

300'ly and ten days to the Spring Meet !

John Hertog
Sag Harbor NY









------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
---------------------------------------------------------------------~->

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/