Re: [Chrysler300] Wheel Size
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Wheel Size



George,
Wheel width is measured inside the flanges. Your 6" high wheels will 
measure 5" wide, where the tire bead seats, inside the flanges.

Mike

At 11:05 PM 6/24/2004 -0400, News4ge@xxxxxxx wrote:
>Hi, All,
>
>When referring to wheel size (that is, the thickness, or depth) is it the
>full outside-to-outside dimension?  Such as, a 6" wheel laid flat on the 
>ground
>would be 6" high, right?  I have 2 wheels, I think from a K, that measure 6",
>but stamped into the metal inside the rim it says 14x5.  What's the story?
>
>Thanks,
>
>George Clineman




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
     Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.