Re: [Chrysler300] Trans Leak

["elmer tuuri" <eltuuri@xxxxxxxxxxx>]

There is two seals--at the kickdown---at the casing --and the shaft, when 
you remove the valve-body--Had same problem years ago--starts to leakwhen 
sitting--when oil drains into pan                                       
Elmer Tuuri    Ont. Canada

>From: Nancy Kramer <nekramer@xxxxxxxxxxxxxxx>
>To: "Ray Menzel" <rjroad@xxxxxxxxxxx>,chrysler300@xxxxxxxxxxxxxxx
>Subject: Re: [Chrysler300] Trans Leak
>Date: Thu, 25 Nov 2004 14:24:26 -0500
>
>Don't know the solution to your problem but our '79 300 does the same
>thing.  We haven't replaced the seal.  We find it even makes a difference
>what the temperature is out side, if the temperature has changed recently,
>or whether the car is parked on level ground.  We thought it was just
>because as far as we know the trans has never been rebuilt and the car has
>about 140,000 miles on it.  Other than that the trans works great.  Been
>leaking off and on like that for years.  When you find the solution I would
>be interested in knowing it.
>
>Regards,
>
>Nancy Kramer
>Webmaster http://www.americandreamcars.com
>Free Color Picture Ads for Collector Cars
>One of the Ten Best Places To Buy or Sell a Collector Car on the Web
>
>
>
>At 11:56 AM 11/25/2004, Ray Menzel wrote:
>
>
> >Happy Thanksgiving to everyone.
> >
> >I have a leak from the transmission on a G that I would like some input 
>from
> >the experts on.  When you run the car daily there is no fluid loss. If 
>you
> >park it, after three days fluid is seen on the floor. Left still for a 
>week
> >it will drain a little over two quarts of ATF out. It is oozing from the
> >seal around the throttle pressure control lever. We have put it up on a 
>lift
> >where you can see very well. We have cleaned the trans surface completly,
> >Filled it to the proper level and left it up on the lift. The fluid will
> >migrate past the seal between two and three days later. I removed the
> >valvebody and checked the seal area and replaced the seal. Same problem.
> >
> >Any ideas????   Thanks Ray Menzel in Michigan
> >
> >P.S. we drained the converter and added 11 quarts to verify the dipstik 
>is
> >the correct length.  RWM
> >
> >
> >
> >
> >
> >To send a message to this group, send an email to:
> >Chrysler300@xxxxxxxxxxxxxxx
> >
> >For list server instructions, go to
> >http://www.chrysler300club.com/yahoolist/inst.htm
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >---
> >Incoming mail is certified Virus Free.
> >Checked by AVG anti-virus system (http://www.grisoft.com).
> >Version: 6.0.801 / Virus Database: 544 - Release Date: 11/24/2004
>
>   ----------
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.801 / Virus Database: 544 - Release Date: 11/24/2004
>
>
>[Non-text portions of this message have been removed]
>




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Autos. Everything you need to know about buying 
or selling a car.  FREE Quotes, 360° Tours, Research,
Blue Book, Compare Vehicles, Buy Used
http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/