Re: [Chrysler300] 300C/D Carbs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300C/D Carbs



I use about 1 1/2 to 2 turns out on all 6 screws ( 2) Idle speed and( 4) 
A/F idle mixture screws.   Gary Barker

pennsy300@xxxxxxx wrote:

>Just got my carbs back from rebuilding, and I am setting them  up.  I know 
>the book says to "adjust the idle mixture screws for best  idle", but roughly, 
>how many turns out from fully closed should there screws be  adjusted?  A 
>ballpark number is what I am looking for.  McTaggart in  sunny Dayton, where the 
>dandelions are in full  bloom.
>
>
>[Non-text portions of this message have been removed]
>
>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
>Yahoo! Groups Links
>
>
>
> 
>
>
>______________________________________________________
>This email was pre-scanned by Spam Guardian
>A Service Provided by http://www.foothill.net
>
>
>  
>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.