[Chrysler300] Update on Stockton 1960 14 Inch Wheel Project

[Tony Rinaldi <awrdoc@xxxxxxxxx>]

Hi To All,

This is a general informational message to the e-mail server. Those who have
ordered the first round of wheels will be contacted individually.

The wheels will be ready in 2 weeks. They have been manufactured and the
orders are being sent to Stockton Wheel where the final powder coating step
will be accomplished. The people who have ordered the wheels will be
contacted by e-mail so that they then can call Stockton Wheel to arrange for
payment and shipping.

The prototypes have been mounted on my 300-F convertible and retain the
300-F hubcaps better than the original wheels. They are heavier gauge metal
and the hubcap clamps grab very tight and once on they are tight to get off.

I also have run the original 1960 Chrysler hubcaps that have no clamps. They
are retained nicely by the welded bumps that engage the 4 recesses in the
hubcaps. They are retained tighter than the original wheels.

The clamps of the 300-F hubcaps do not engage the bumps. Just like the
original set up.

300'ly,
Tony Rinaldi




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one?click away.? Make Yahoo! your home page?now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/