[Chrysler300] Leaky Valve Covers - G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Leaky Valve Covers - G



Good morning,

The left side valve cover is leaking on the G. Should I pull off both rams and replace the valley pan? The valley pan is only a year or so old and has less than 2000 miles on it since I last had it off. Looks like I am going to be able to make it to Carlisle. Before driving that distance, I was going to try and replace the VC gasket.

Next what are the various tricks out there to sealing a 4 bolt valve cover, especially on a ram car where the intakes need to come off. 

Best regards,

Richard Osborne
Columbus, OH



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one?click away.? Make Yahoo! your home page?now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/8LmulB/TM
--------------------------------------------------------------------~-> 

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.