RE: [Chrysler300] The Belt Jumpin' Blues

["Tony Bevacqua" <tonysru2@xxxxxxxxxxx>]

They aren't available according to my old time supplier, but they can
"match" with numbers stamped on them.
Tony

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of John J. Hertog
Sent: Saturday, August 19, 2006 9:20 AM
To: 'Ray Jones'; 'Rich Barber'
Cc: mallyn@xxxxxxxxxxxxxxx; MJRAGUSE@xxxxxxx; 'Chrysler300'
Subject: RE: [Chrysler300] The Belt Jumpin' Blues

Ray is perfectly correct - a matched set of belts consists of two
"adjoining" belts cut off from the same piece of belt stock.  Kinda like two
adjoining slices of boloni as they come off the meat slicer.   This was
standard practice back in the 60's and, if you look at an old Gates belt
application book, you will find a notation stating that "matched set
required"
 
I don't even know if matched sets are still available today..
 




To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/