RE: [Chrysler300] Source Needed for Rocker Panels for my K convert

["Matt Allyn" <mallyn@xxxxxxxxxxxxxxx>]

Here is who I obtained my replacement panels from for my '62 300.

ROCKER KING
http://my.execpc.com/~sonoma/
Welcome to one of the largest collections of after market body repair panels
in the U.S. I have a couple of thousand rocker panels, quarter panel
sections, front fender sections, head light panels, dog legs and door skins
that were made back in the late 1940's to the early 1960's. The auto
panelsstart with 1935 and go up to 1964. The truck panels start with 1946
and go up to 1985. The earliest Mopar truck panel starts with 1956, the
earliest Ford truck panel is 1952 and the GM truck panels start with 1946,
sorry, no Studebaker truck panels. Many of these panels have not been
manufactured since the early 1960's so when they are gone I have no way of
producing more. The pictures below show the different areas the were made
for repairing your car or truck, they were generally made for all makes and
models, not just what is listed for the pictures shown. If you would like to
check on what is available for your vehicle please sonoma@xxxxxxxxxx and I
will write back to let you know which sheet metal repair panels I have for
you. If you wish to inquire via fax the number is 262-549-9643. You can
reach me in person during the day from 9:00 AM until 1:00 PM CST at
262-549-9583. 





-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of moparpjf@xxxxxxx
Sent: Tuesday, October 17, 2006 6:48 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Source Needed for Rocker Panels for my K convert

Hi Group:
 
    Any suggestions for sources for rocker  panels?  Before you tell me to
go to the sources page at our web site, let  me inform you all of the
following:
 
    Green Mountain says they do not have any early  model Chrysler rockers.

The specific quote was "Naw - nothing like  that."
 
    Rocker King - the telephone number is no longer  current, and I was told

to check the number and dial again.   "Anywho.com" does not show a listing
for 
them.
 
    The non-specific listing for Ohio (tel. #  513-885-5295) reaches some
woman who has no idea of what a rocker panel is,  and who, obviously, is not
in that business.
 
    E-mail and phone to Rolling Steel Body parts result  in no contact.  The
e-mail was returned as non-deliverable, and the  telephone response was the
same as that with Rocker King.
 
    That exhausts the listings on our web site for  rocker panels - any
suggestions will be appreciated.
 
Thanks,
 
Pete Fitch   


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links








To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/