Re: [Chrysler300] 1961 Seat Belts

[Paul Holmgren <paulholm@xxxxxxxxxxxxx>]

Paul Thomassen wrote:
> Before I drill holes to mount a pair of seat belts in my newly acquired
> 61G, is there anyone's advice that has done this that I should beware
> of.  I have read the Tech Article by Bob Merritt, and ordered a set of
> belts from Andover Automotive for the task.  I just thought I would ask
> before I drill a hole that will be a permanent reminer of my mistake if
> I should do this wrong.

> Paul Thomassen

> Pella, IA

Murphy's axiom:  Measure once drill many times  :-)

-- 
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps L#6


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/