[Chrysler300] power booster to MC rod adjustment

[ednavan9 <ednavan9@xxxxxxxxxxxxx>]

Hi all,
Any input on how one determines the length of the rod coming out of a  
Ross- Midland power brake booster, on a 300k, into a new dual master  
cylinder?  Or more accurately  what should that clearance be between  
the end of the MC piston and the rod out of the booster?  The MC  
piston sticks out a little from the base, at least before bled and  
mounted, if that makes any difference.

Thanks.

HAPPY HOLIDAYS
Van


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/