RE: [Chrysler300] Gear Reduction Starter in a '61

["Owen Grigg" <ram300@xxxxxxxxxx>]

Try Tim at Roadrunner starters, he was doing light high torque units for all
the cast iron TF. I have had one in my 300C driver for 4 or 5 years.


http://www.prostart.co.nz/



Owen




>>> "Richard Osborne" <richard@xxxxxxxxxxxx> 01/19/08 5:23 pm >>> 
Good afternoon,

Can a later model gear reduction starter bolt into the '61 413?

I didn't think of comparing until after I bolted the original rebuilt
starter back into the G.

Man, those originals are heavy!

Richard





To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links





To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/