[Chrysler300] Brake conversion

[Bill Huff <czbill@xxxxxxxxxx>]

Hi,

I am contemplating a disk brake conversion for my 300 D.  I already 
have am AAJ kit, but I am not too enthusiastic about the MC to valve 
cover clearance.

I was thinking of using an offset adapter and a two bolt MC to 
provide more clearance.

http://www.reillymotorsports.com/store/manufacturers.php?manufacturerid=6

This adapter is for the A bodies.  All the measurements I have made 
seem to show that all (at least all the MOPAR) 4 bolt MCs have the 
same bolt pattern.  So, my question is, other than the issue of 
whether the 4 bolt pattern is bolts or studs, will the offset MC 
adapter fit and work on the older Chryslers?  Any knowledge or 
edjumacated guesses appreciated.

Thanks,

Bill Huff


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/