[Chrysler300] wanted location of anchors re mounting of rear seat belts on 300H conv

["Fern Rivard" <crc@xxxxxxxxxxxxxxx>]

Hi Mark:

    The only problem with those dimples is that on a 300H convertible, they show up behind the 3/4" sheet of plywood that supports the back of the rear seats. So how does one deal with that other than having to make some holes of some sort to let the belts access the correct anchor points?
    
    Fern



----- Original Message ----- 
From: mrs954@xxxxxxx 
To: crc@xxxxxxxxxxxxxxx 
Sent: Monday, April 21, 2008 6:51 PM
Subject: Re: [Chrysler300] wanted location of anchors re mounting of rear seat belts on 300H conv


Hi Fern,
I don't have any pics, but there are little "dents" on the axle hump to locate where to drill the holes for the rear seat belts. These dents are visible when you remove the back seats. They are on the angled panel that faces toward the sun visors. Does that make sense? If you have sound deadening spray on your floor it might be difficult to find those dents. When you install the belts, it's a good idea to use very large diameter washers on the outside to distribute the load and reinforce the anchor point.

Best regards,
Mark Souders
300H
Mohrsville, PA
 


-----Original Message-----
From: Fern Rivard <crc@xxxxxxxxxxxxxxx>
To: chrysler300 <chrysler300@xxxxxxxxxxxxxxx>
Sent: Mon, 21 Apr 2008 5:47 pm
Subject: [Chrysler300] wanted location of anchors re mounting of rear seat belts on 300H conv


    I need to know exactly where to anchor the rear seat belts on 1962 300H 
convertible.  Does anyone have some digital photos that they could please email 
me to show that?
    Thanks from Fern





--------------------------------------------------------------------------------
Get the MapQuest Toolbar, Maps, Traffic, Directions & More! 


--------------------------------------------------------------------------------


No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.23.3/1390 - Release Date: 4/21/2008 4:23 PM


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/