[Chrysler300] Re; Sill plates all models 57-59

["Ulf Larsson" <ulf.larsson@xxxxxxxxxxxx>]

Hi all,
 
 
While these are reproductions made in Sweden using tooling still
available it should still be possible to order them.  I believe
originally distributed in the US by JC Carter, Timo Tanskanen, and Gary
Goers, but since Michael Burke is in close relation with the people over
here actually making them a good idea would be to bring it up with him
on where it would be most convenient to source.
 
 
Best regards
Ulf, Sweden  3N57 2660


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/