[Chrysler300] '55-56 4bolt Exh Manifs NEW!

["Wayne Graefen" <wgraefen@xxxxxxxxxxxxxx>]

http://tinyurl.com/42umhh

This just in!   There are now truck style ram horned exhaust manifolds being recast.  They are beautiful!   I talked with the seller and this was a 5 year very expensive project.  If you have any '55 C300 or '56 300B, or a New Yorker of either year,  this is your high performance header.   These were on some Kiekhaefer race cars and stick Bs.  This is NOT your restoration production exhaust manifold. 

The seller is starting at $300 on these auctions which is a little more than half what good originals have been selling for lately.  Your advantage is that these are better than the originals and aren't rusted or cracked or warped!!!

Carl Kiekhaefer would be proud.

Note these will NOT work in the chassis of your '57-58 car unless you want to shim up your motor mounts.  The shimming is necessary to raise the engine until the manifolds clear above the right front upper control arm and away from the steering box.

Wayne G


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/