[Chrysler300] Re:disk brakes for 57's
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Re:disk brakes for 57's



As the keeper of the '57 torch, every once in a while I must reply about inadequate brakes of the Chrysler Centerplane type.

1.  These brakes were fully adequate when new and are still adequate for modern traffic.

Now, after 50 years, we have virtually lost the machine shop ability to arc grind new linings to the size of the drums but there are still shops that do it.  This fitting of shoes to drum is one of two critical concerns with those brakes.  The second is that far too often, in the name of saving a few bucks, low quality shoe linings have been purchased and they simply don't grab.

Of course there are possible other factors including the installation of close but incorrect shoes, wheel cylinders and master cylinders down through the cars history.  There are also low quality brake hoses at parts houses and hobby suppliers again in the name of cost savings.  Some mechanics don't bother to properly adjust front wheel bearings even to equal their set from side to side.  And suspension wear is setting in lo these many miles.

I love disc brakes too as they are superior, but even they only work right when everything else is right.  AAJ sells a fine kit with good quality parts.  There are even better kits available for more money but some require a change to 15" wheels for caliper clearance.

Wayne G

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.