[Chrysler300] VB: Carburettor rebuild, 2903S
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] VB: Carburettor rebuild, 2903S



Hi,  I saw your request.  Pls turn to Jon Hardgrove as stated below.  His operation is in Missouri.  He can do rebuilds for you, or you can by both Jets,  stock or per your own request and step up rods (metering rods).  He did buy Carters old prototype machine for to produce them.
 
Here is what was stock for your AFB 2903S;
 
Step up rods (metering rods)                        16-119   Marking of size is given on each rod. (size .062" resp ,053")
 
Primary Jets                                               120-159 (original marking).  Equals to modern marking 120-389,  while sized 0,089"
Secondary Jets                                           120-196 (Original marking).  Equals to modern marking 120-359, while sized 0,0595"
 
 
I hope you all find helpful.
 
Best regards
Ulf Larsson, Sweden
 
 
________________________________

Från: Ulf Larsson 
Skickat: den 22 juli 2008 10:20
Till: chrysler300@xxxxxxxxxxxxxxx
Kopia: 'Jon and Sue Hardgrove'
Ämne: Carburettor rebuild
 
Hi Tom and group,
 
 
On the quest about where to turn for a carburettor rebuild I´d like to mention this source,  The carburettor shop,  Carburettor King
 
http://www.thecarburetorshop.com/ 
 
 
or through email   carbqueen@xxxxxxxxxxxxx           
 
 
I have no connection to the above company and the owners,  Jon and Sue Hardgrove  other than being a most pleased customer appreciating their excellent service in all aspects and the possibility to address a true specialist in the area (The same nice experiences as with Bob Walker at HotHemiHeads) .   Their carb repair kits have turned out superior to others and well worth the somewhat higher price while also contain a lot more parts than you´d normally would find.  It will contain new primary jets of the correct size for example. Never saw that before.
 
Also they are able to custom make new Jets to your specification and also  new MEETERING Rods, enabled from taking over old machines from Carter.
 
 
Pls feel free,
Best regards, Ulf Larsson, Sweden    
 
 


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.