Re: [Chrysler300] Intake Manifold Casting # Needed

["jean-yves chouinard" <jymopar@xxxxxxxxxxxxxxx>]

Pete
 The casting # on my K with original engine is 2206000. Valley pan should be available at your local parts store( NAPA or Carquest). NAPA part#  for intake manifold gasket is MS15914.
Jean-Yves.
  ----- Original Message ----- 
  From: moparpjf@xxxxxxx 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Tuesday, August 26, 2008 4:07 PM
  Subject: [Chrysler300] Intake Manifold Casting # Needed


  Hi Group:

  Does anyone have handy the casting number for the correct intake 
  manifold for a non-ram K. Also, anyone have a spare valley pan lying around. Mine 
  somehow disappeared when the motor was rebuilt.

  Thanks,

  Pete Fitch

  **************It's only a deal if it's where you want to go. Find your travel 
  deal here. 
  (http://information.travel.aol.com/deals?ncid=aoltrv00050000000047)

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/