Re: [Chrysler300] PCV location on balance tube.

[Marshall Larson <yelof@xxxxxxxx>]

The fitting is centered on the flat surface side to side and centered on
5 inches from a turned up end and toward the passenger side of the
engine.

Marshall

 
On Fri, 29 Aug 2008 21:20:04 -0300 "jean-yves chouinard"
<jymopar@xxxxxxxxxxxxxxx> writes:
> Hi to all.
> I'm installing longram manifolds on my 60 Dodge on top a 64 big 
> block which has a PCV valve. If I'm assuming correcly, the PCV hose 
> goes from the valve cover to the ram balance tube. Can someone point 
> out the approximate location on the tube? On top or on the side of 
> the tube? My plan is to drill a hole and install some kind of self 
> tapping fitting to connect the hose to.
> Thanks!
> Jean-Yves in New Brunswick.
>

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/