[Chrysler300] gauge voltage limiter summary

["Bob Merritt" <bob@xxxxxxxxxxxxx>]

Forwarding message below from Dave Dumais who is having email problems.
++++++++


Hi Bob, just working with a 3 week old broken ankle.   I have hobbled to the K , and have tested the voltage limiter per the manual , key on ign,
and the test lamp blinked intermittenly.....voltage limiter is just fine.   the unit in the tank is new, with a new ground clip to both unit line and fuel line.     There are additional grounds: unit to body, and tank to frame.   No response from mr. fuel gage..

The ground (from rear of eng. to firewall) will be removed, sanded clean and re-installed.    The only other fix that is listed is to connect a ground strip from back of inst. panel to firewall.     I could still replace the fuel gage when the panel is removed, but it tested ok.

Any suggestions would be great,    I am still unable to post messages on club server, perhaps you could pass this on for me.

thanks,  Dave Dumais

++++++++++ 

  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/