SV: [Chrysler300] Wing/acorn nuts for 55-56 air cleaners

["Narve Nordanger" <narve.n@xxxxxxx>]

John,

You are absolutely correct. I forgot that the front part of the hood
underside is body color (ahead of the radiator support rubber molding), as
well as any reinforcements/braces. My car is an early one (#1161) by the
way.

 

Narve N

UK/Norway

 

Fra: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] På
vegne av John
Sendt: 3. desember 2009 15:32
Til: Chrysler300@xxxxxxxxxxxxxxx; Narve Nordanger
Emne: Re: [Chrysler300] Wing/acorn nuts for 55-56 air cleaners

 

  

I'm late on this, but I'll relay what I have found. C300 Chryslers had a
body colored firewall and the inner fender panels, radiator core support and
a "portion" of the underside of the hood was painted a black or very dark
grey shade. The leading and trailing surfaces of the hood's underside were
body color. This was approximately up to the reinforcement in the rear and
the flap in the front. I've had people question my last statement, but have
seen original cars done this way. Others claim they were all black on the
bottom side. Once again I'll state that Chrysler made changes throughout the
year.

The 300B cars were all body color under the hood as I think all "Detroit"
build Chryslers were. For 17 years we owned an exceptional original '56 New
Yorker Sedan that was built in Los Angeles. That car was done in the engine
compartment as the 1955 C300's were on colors. A few years ago we sold the
NYer to our long time friend Mike Porto who has do a 100 point restoration
on the car and it is magnificent.

John Lazenby

----- Original Message ----- 
From: Narve Nordanger 
To: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>  
Sent: Wednesday, December 02, 2009 4:21 PM
Subject: VS: [Chrysler300] Wing/acorn nuts for 55-56 air cleaners

My C-300, which appeared to be rather untouched (AKA original) when I go it,
had the same set up as yours. 

Looking underneath (despite the warning); the original wingnuts were open,
but unfortunately I lost these when fiddling with the carbs and taking a
spin without the filter. Currently run with replacement solid ones.

Speaking about originality: Guess there is a difference with the B, but the
hood underside of my car was positively painted flat dark grey and I have
replicated that finish.

Narve N

NORWAY

Fra: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> ]
På
vegne av Richard Barber
Sendt: 1. desember 2009 23:51
Til: cotejohnr@xxxxxxx <mailto:cotejohnr%40aol.com> ;
Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> 
Emne: [Chrysler300] Wing/acorn nuts for 55-56 air cleaners

While you're at it, what is the proper combination of nuts for the delta
wing air cleaners of 1955/56? Mine came with open wing nuts on the
carburetor studs and acorn nuts on the cans. This made it easier to remove
the entire assembly and prime the carbs before I added an electric fuel pump
to do this.

Don't look underneath.

Rich Barber
Brentwood, CA
1955 C-300

-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
<mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
<mailto:Chrysler300%40yahoogroups.com> ]
On
Behalf Of cotejohnr@xxxxxxx <mailto:cotejohnr%40aol.com>
<mailto:cotejohnr%40aol.com> 
Sent: Tuesday, December 01, 2009 2:46 PM
To: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
<mailto:Chrysler300%40yahoogroups.com> 
Subject: [Chrysler300] Wingnuts for G's

Hi all,
Question for the G owners and G concours judges;

On the ram air cleaners, were the factory wingnuts all the same or were 
there two different ones on each air cleaner. (Open topped vs. solid 
wingnuts)

If all 4 were the same, were they open topped ones or solid.?

If there were two different ones on each cleaner, which position on the 
cleaner was open topped and which one was closed (solid) topped.?

Thank you,
John Cote
Guilford, CT.

------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
<mailto:Chrysler300%40yahoogroups.com> 

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups
Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/