[Chrysler300] 1958 Chrysler 300 steering wheel

[<georgelaurie@xxxxxxxxxxx>]

Hello guys, I have just finished making the mould for the 57/58 steering wheel and will start casting them directly ( 2 piece with the colours in the resin like factory )
I have nailed down the Desert Biege for the top of the 57 after a lot of experimenting, I did this from a section cut from an original 300 wheel down at the steel core area. I have done the same on 3 wheels and the colour is the same on each, so I am happy that the discolouring from the sun has not affected the inner material I used to match from.
Ok here is my next problem, from the pictures I have seen I have serious doughts that the 58 300 D wheel used this same colour on the main body, so to get it right I am hoping someone will have an old ruined 1958 300D wheel they can send me a chunk from ( the main body ) for a proper colour match. Can anyone help? regards George.

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/