RE: [Chrysler300] Tach Cable Lube & Console - 300H
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Tach Cable Lube & Console - 300H



Doug,

 

I would consider this product:

 

http://www.nyalic.com/uses.html

 

It is very durable and I’ve a lot of it over the years especially like on wire wheeled or bead blasted fasteners.  It doesn’t chip, goes on thin and stays in place.  You would need to try it on a small section first to see if it is the level of gloss you want.  Eastwood used to sell it but lost the marketing agreement.  They sell something called Diamond Coat, but it is not the same.  Nyalic is tough stuff.

 

For the tach cable I’d consider graphite or Penephite from Kano labs:

 

http://www.kanolabs.com/

 

I’ve had good luck with it for cables.

 

 

Bob J

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 2HsandaHeritage@xxxxxxxxxxx
Sent: Wednesday, September 29, 2010 8:10 PM
To: Chrysler 300 Club International
Subject: [Chrysler300] Tach Cable Lube & Console - 300H

 

  



I have my console out and think that now is the time to lube the tach cable. 

The archives don't say much about what type and how much to use. 

All suggestions will be appreciated. 

I am installing seat covers, seat foam, carpet and winnlacing from Gary - The original carpet is still there! - Was covered by another layer.  

Does anyone know where I can find the rubber gromets that fit in the floor pan that the seat bolts go thru? 

I am having the aluminum console trim strips polished and don't want to have them re-anodized. Is there a recommended clear finish to use to prevent oxidation? 

Doug Warrener 

Fair Oaks, CA 

300H 

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.