[Chrysler300] 300D headliner

[Tom Chvapil <tchvapil@xxxxxxxxxxxxx>]

OK, 
I am just about there. The 3 ribs holding the headliner are polished beyond perfection (I have spent what is left of my babyhood buffing and polishing them today). Insulation in place, but not sure if there is a 'nailer' hardboard strip that goes right above the rear window, or does it just get glued and tucked under the stainless trim?

The few cars that I have done in the past had that strip (now upholstery shops use hard rubber) in the front and/or rear and you just staple the stretched headliner to it. Did Chrysler use something like this?

Thanks for any help,
Tom

Tom Chvapil
Tucson,Az
tchvapil@xxxxxxxxxxxxx




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/