Re: [Chrysler300] belt anchors

[Bob Merritt <bob@xxxxxxxxxxxxx>]

For pictures of the 62 Chrysler seat belt installation, see

http://simplexco.com/auto/cbelt/more.html




On 3/24/2011 4:59 PM, Val Jeffers wrote:
>
> I may be all wet, but I was always told Chrysler welded a 13/16" nut 
> to the floor pan so you could simply drill up through the bottom to 
> have a place to anchor the belt.
>
>                                                                            
> Val Jeffers
>
> --- On Thu, 3/24/11, Jerry Lindsay <jerrylindsay300h@xxxxxxxxxxxxxxx 
> <mailto:jerrylindsay300h%40tampabay.rr.com>> wrote:
>
> From: Jerry Lindsay <jerrylindsay300h@xxxxxxxxxxxxxxx 
> <mailto:jerrylindsay300h%40tampabay.rr.com>>
> Subject: Re: [Chrysler300] belt anchors
> To: retromobilia@xxxxxxxxxxx <mailto:retromobilia%40comcast.net>
> Cc: "Chrysler 300 Club International" <Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com>>
> Date: Thursday, March 24, 2011, 2:34 PM
>
>
>
> John, You are right about the nut inside.
>
> Jerry
> ----- Original Message -----
> From: retromobilia@xxxxxxxxxxx <mailto:retromobilia%40comcast.net>
> To: Jerry Lindsay
> Cc: Chrysler 300 Club International
> Sent: Thursday, March 24, 2011 2:08 PM
> Subject: Re: [Chrysler300] belt anchors
>
> Jerry, How about a nut against the washer on the inside to spread the 
> lateral forces? below the carpet of courssse.
> John
>
> J D Jung
> Retromobilia.net
>
> ----- Original Message -----
> From: "Jerry Lindsay" <jerrylindsay300h@xxxxxxxxxxxxxxx 
> <mailto:jerrylindsay300h%40tampabay.rr.com>>
> To: "james mcmullan" <macthehammerjim@xxxxxxxxx 
> <mailto:macthehammerjim%40yahoo.com>>, 2HsandaHeritage@xxxxxxxxxxx 
> <mailto:2HsandaHeritage%40comcast.net>
> Cc: "Chrysler 300 Club International" <Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups.com>>
> Sent: Thursday, March 24, 2011 10:46:10 AM
> Subject: Re: [Chrysler300] belt anchors
>
> Doug is right, washer only on inside of car, the anchot threads right 
> into the plate on the bottom side of the floor pan.
>
> Jerry Lindsay
> Seminole, Fl
>
> ----- Original Message -----
> From: 2HsandaHeritage@xxxxxxxxxxx <mailto:2HsandaHeritage%40comcast.net>
> To: james mcmullan
> Cc: Chrysler 300 Club International
> Sent: Thursday, March 24, 2011 12:44 PM
> Subject: Re: [Chrysler300] belt anchors
>
> Thanks Jim,
>
> My H is different from your F.
>
> It has a factory installed plate that the the anchor threads into.
>
> Doug
> ----- Original Message -----
> From: "james mcmullan" < macthehammerjim@xxxxxxxxx 
> <mailto:macthehammerjim%40yahoo.com> >
> To: "Listserver" < Chrysler300@xxxxxxxxxxxxxxx 
> <mailto:Chrysler300%40yahoogroups..com> >
> Sent: Thursday, March 24, 2011 8:57:43 AM
> Subject: [Chrysler300] belt anchors
>
> Just a reminder. If you use a washer on both sides of the floor pan 
> they MUST be
> diferent diameters, or the flexing will break out the flore. Jim 
> McMullan 300 F
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> 
> ------------------------------------------------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 10.0.1204 / Virus Database: 1498/3528 - Release Date: 03/25/11
>



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/