Re: [Chrysler300] billz speed o meter
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] billz speed o meter



  Bill,

  When parts are swapped and the problem persists, maybe whatever the swapped part is is not the problem. Or, both swapped parts have the same problem. So, swapping parts may be a plan that doesn't work too well in all cases. 

  Bouncing I have found to be a cable problem. There is no damping per se in a speedometer head. The head needs a clean signal. The needle cup also needs to float smoothly on clean bearings with the correct lube which is not the same lube that should be used inside the cable housing. The bearing that sees cable rotation does not like cable lube either and must rotate smoothly. 

  A worn out cable housing or core or both can cause speedo needle bounce and even with proper lube. Cable routing is critical also so the thing is not bent around too tight. 

  A speedo shop will have the equipment to check out both of your instruments, lube and calibrate as required and build you a new cable if required. This would be another route to diagnose and fix. I like this plan.

  I think that J C Auto in Lynwood, WA, would be a good place to have your treasures checked out and maybe even restored.

  Warren Anderson
  Sedona,AZ

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.