RE: [Chrysler300] 300J heads - correct #s ?

["C Bilter" <cbilter@xxxxxxxxx>]

Oops!  Sorry, begging forgiveness!  Brain malfunction.

 

The J had 4 bolt valve covers which was the last year for 4 bolt covers.
They have the "ears" on each end of the valve covers but are not drilled.
The heads do not have the "extensions" for the other two studs on the lower
front and rear.  This per George Riehl as stated in a 2009 email.  The K
started with 6 bolt covers: I assume the ram K did as well then.

 

Carl

  _____  

From: Mike [mailto:mwl1967@xxxxxxx] 
Sent: Thursday, September 01, 2011 10:51 PM
To: C Bilter
Cc: Rich Barber; <chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] 300J heads - correct #s ?

 

I didn't know the J had 6 bolt valve covers; what year did they make that
change?

 

Mike Laiserin

Sent from my iPod


On Sep 1, 2011, at 6:08 PM, "C Bilter" <cbilter@xxxxxxxxx> wrote:

  

Yes. Ram K heads same as the J. The whole engine is same as the J, except
the distributor model number (but advance curves are the same) and the C300K
stamp on the block.

Carl

_____ 

From:  <mailto:Chrysler300%40yahoogroups.com> Chrysler300@xxxxxxxxxxxxxxx
[mailto: <mailto:Chrysler300%40yahoogroups.com> Chrysler300@xxxxxxxxxxxxxxx]
On
Behalf Of Rich Barber
Sent: Thursday, September 01, 2011 4:47 PM
To: 'Mark Lindahl';  <mailto:chrysler300%40yahoogroups.com>
chrysler300@xxxxxxxxxxxxxxx; 'Miklas'
Subject: RE: [Chrysler300] 300J heads - correct #s ?

They don't list '64 300K ram-engine heads. Would they be the same as the J
heads?

From:  <mailto:Chrysler300%40yahoogroups.com> Chrysler300@xxxxxxxxxxxxxxx
<mailto:Chrysler300%40yahoogroups.com>
[mailto: <mailto:Chrysler300%40yahoogroups.com> Chrysler300@xxxxxxxxxxxxxxx
<mailto:Chrysler300%40yahoogroups.com> ]
On
Behalf Of Mark Lindahl
Sent: Thursday, September 01, 2011 1:47 PM
To:  <mailto:chrysler300%40yahoogroups.com> chrysler300@xxxxxxxxxxxxxxx
<mailto:chrysler300%40yahoogroups.com> ;
Miklas
Subject: Re: [Chrysler300] 300J heads - correct #s ?

Hi Jeff,

Check this website out. I think it is correct. I could use a 300J engine too
:<)
 <http://www.mymopar.com/headcastnumb.htm>
http://www.mymopar.com/headcastnumb.htm

Regards,
Mark Lindahl
'63 300 Conv.

----- Original Message ----- 
From: Miklas 
To:  <mailto:chrysler300%40yahoogroups.com> chrysler300@xxxxxxxxxxxxxxx
<mailto:chrysler300%40yahoogroups.com>
<mailto:chrysler300%40yahoogroups.com> 
Sent: Thursday, September 01, 2011 3:24 PM
Subject: [Chrysler300] 300J heads - correct #s ?

Group

I'm looking at a 300J engine. I need to know the # for the correct 300J
heads. Anyone have that # reasonably handy?

I did check the website first, but didn't find head #s listed. Did I miss a
page? 

THANKS

Jeff Miklas

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/