Re: [Chrysler300] Transmission Wet Burps on a '57

[Terry Mctaggart <terrymct999@xxxxxxxxx>]

Keith, this is Terry McTaggart, and I have experienced the same problem, with a 58 DeSoto and my current 300D.  I have a solution, what I call the "Redneck answer", crude, cheap but very effective.  It's been on my 300D for decades.  Get a rubber stopper (a cork, if you will) of the appropriate size, and slice it halfway thru.  Slip it over the top of the dipstick,  just under the cap, use a little rubber cement, and you are done!  Less than a buck, and all your problems go away.  



________________________________
From: keboonstra <kboonstra@xxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Monday, September 12, 2011 11:59 PM
Subject: [Chrysler300] Transmission Wet Burps on a '57


  
Somebody's got to have a brilliant answer for me here.  My 300C transmission keeps burping fluid up the fill tube and I don't why or how to stop it.  It lands on my right frame rail and drips off to make a mess of the floor besides.

I followed instructions in the service manual and pulled out both the regulator valve and the torque converter valve, polished them both up, and re-installed them. There was only very minor scratching on either of them.  No help at all.

Anything else the manual suggests as a cause looks to be much more involved.

The transmission seems to operate just fine otherwise with respect to shifting, etc.  When the transmission is warmed up my idle fluid level checks at halfway between low and full.  Should I remove some fluid?  Will that solve it?

The transmission is freshly rebuilt.  Was something possibly done wrong in the process?  Is this a common problem?

The car is otherwise pretty close to Lake George ready, but this is driving me bonkers.  Any help from the team?

Thanks.
Keith Boonstra
Holland, Michigan where it's still 75 degrees at midnight.


 

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/