Re: [Chrysler300] Heat tubes?

[Anthony Rinaldi <awrdoc@xxxxxxxxx>]

Hi Travis,

Some will tell you that no heat to the carbs will not matter but, in fact, being outboard from the engine heat you will get pooling of gas. 

But, the biggest problem will be that you are removing the crossram supports. There are ways to support the rams from the headers. I have some pictures on how others have done it if you need, ask. If you are installing J/K headers there is a threaded stud to attach to and you will need the lower braces because of the cast iron weight. 

Without support, the crossrams could crack from vibration. 

Tony Rinaldi
300-F Conv't

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/