[Chrysler300] 62-64 steering shaft w/box and other shafts.

[Ray Jones <hurst300@xxxxxxxxxx>]

Hi Guys;
I have a 1962-1964 Steering Shaft with the Steering Flat Bottom Wheel on one end and the Pitman arm on the other with all that goes in between.
Power Steering box looks OK. 
If anyone needs this or needs photos , reply with your needs.

I also have a 1965 Steering shaft for a console car, probably out of an "L".

I have several others with gearshift levers and the shift cables on the bottom of the shaft, Again for 1965, non-consol.
Other shafts have gearshift levers and levers on the side for the linkage to the trans.
All 11 shafts have steering wheels attached.


Finally, I have a large lot of Hubcaps for many Dodges and Plymouths from the 30's thru the 60's. Some singles some pairs and a few sets of 4.
Let me know if anyone needs any of these, before I list them on ebay.

Ray Jones




------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/