Re: [Chrysler300] 1955 through ? starter

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  Larry, 

  The moving coil is what I think you are looking for. No, sorry, do not have a spare.

  There is a link screw that threads into the moving core. The clevis and yoke thing pins on to the screw. This threaded piece provides the means for a very critical adjustment. Hopefully you have a manual that describes how to attain .080 to .109 pinion to thrust washer clearance with the core fully sucked in. But, if you don't, travel off the list and send me a fax number. Of course, you need none of this until you source the missing pieces. 

  Warren Anderson
  Sedona,AZ
     
  Dearly Beloved.....I have acquired a good starter and solenoid for the 331 Hemi but am missing the round cylinder that lives in the solenoid cave until the magnet-power forces it out and the bendix goes round. These don't wear out but maybe your starter has and you would be willing to sell this small part. Please? I have a 57 starter and solenoid and it looks the same as the 55 but it also is missing this simple part. Can send photo of what is missing..(Well, how can you send a photo of a part that is missing? I can show the space that should be filled up with your part!)

  jettlarry@xxxxxxx Larry Jett 510-794 7911 Newark CA

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/