Re: [Chrysler300] 300 G Exhaust
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 G Exhaust



When I bought my exhaust system for the G from Eileen, the driver's side  
pipe leaned up against the torsion bar.  We heated it an hammered it  until 
it was maybe 2" away.  I called Eileen to let her know and suggested  that 
they adjust the program they were using to shape the system, and she  referred 
me to the shop that was doing the pipes for her.  I don't remember  the 
name, but it was somewhere near her in the Philadelphia area.  Kepich  advises 
me that they have never had a shop in Pennsylvania, so I doubt that they  
were the makers.
 
Pete Fitch
 
In a message dated 7/9/2012 6:33:43 P.M. Eastern Daylight Time,  
awrdoc@xxxxxxxxx writes:

 
 
 
Hi to all,

I bought a system thru Eileen and presume that Kepich did  it. It was not
mandrel bent. Something that I would insist on  today.

I have purchased custom mufflers from Waldron and was well  pleased.

When ordering from either of these sources, you should inquire  about 
mandrel
bent curves for better flow. Ordering your system in  stainless will be
beneficial, especially if the vehicle is stored on  concrete in a cold
unheated building.

Tony Rinaldi,

300-F  Conv¹t

From: Marshall Larson <_granitledge@xxxxxxxxxx 
(mailto:granitledge@xxxxxxxxx) >
Date:  Mon, 9 Jul 2012 11:59:19 -0500
To: Chrysler 300 Club <_Chrysler300@xxxxxxxxxxxxxxxx 
(mailto:Chrysler300@xxxxxxxxxxxxxxx) >
Subject:  Re: [Chrysler300] 300 G Exhaust

I believe it is a company called Kepich  Exhaust that is continuing the
systems that Eileen sold.

[Non-text  portions of this message have been removed]

[Non-text portions of this  message have been removed]






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.