RE: [Chrysler300] Compression pressure , 300H
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Compression pressure , 300H



Compression testing is a bit hit and miss and doesn't pinpoint the problem.
Good advice below.  However, if you suspect rings are broken/worn or valves
aren't sealing properly, or even a leaking head gasket,  a "leak down test"
is more accurate in diagnosing the problem.  Might need to go to a good
mechanic if you haven't got the gear.  Videos on You Tube explain.

 

Cheers

 

Henry

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Flathead Engineering
Sent: Saturday, 10 November 2012 4:12 AM
To: mgoodknight@xxxxxxxx; Rich Barber; RICK AND DEBBIE CLAPHAM
Cc: mmoore8425@xxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Compression pressure , 300H

 

  

Rick really knows his stuff as he a second generation Chrysler guy and a 
professional mechanic. Suprised that he didn't mention the altitude effect 
on compression readings here in Denver. Makes about a 15% difference and 
definitely affects jetting. Some of you may have gotten a taste of that at 
the Golden meet.
----- Original Message ----- 
From: "RICK AND DEBBIE CLAPHAM" <rixpac@xxxxxxx <mailto:rixpac%40msn.com> >
To: <mgoodknight@xxxxxxxx <mailto:mgoodknight%40juno.com> >; "Rich Barber"
<c300@xxxxxxx <mailto:c300%40ez2.net> >
Cc: <mmoore8425@xxxxxxx <mailto:mmoore8425%40aol.com> >;
<chrysler300@xxxxxxxxxxxxxxx <mailto:chrysler300%40yahoogroups.com> >
Sent: Friday, November 09, 2012 6:22 AM
Subject: RE: [Chrysler300] Compression pressure , 300H

>
> I agree with everything written on the compression testing. The pressures 
> seem a little low. We have diagnostic machines that direct you to needed 
> repairs, your battery condition, ignition primary and secondary. Timing 
> and spark plug burn time, cylinder contribution. Combustion efficiency 
> through all ranges. These machines are like and external computer 
> monitoring system that our old cars just didn't come with and the new cars

> have today. I have been using these machines for several years now and 
> have found some interesting needed repairs. Cam and lifter replacement, 
> worn distributor, wrong timing and vacuum advance totals. needed metering 
> rod change in primary. After analysis repairs I picked up two miles per 
> gallon and performance plus lower emissions. These machines, with the use 
> of a chassis dynamometer can yield even greater accuracy. The results can 
> be printed out take with you. Rick
>
>
>
>
>
>
> To: c300@xxxxxxx <mailto:c300%40ez2.net> 
> CC: mmoore8425@xxxxxxx <mailto:mmoore8425%40aol.com> ;
Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> 
> From: mgoodknight@xxxxxxxx <mailto:mgoodknight%40juno.com> 
> Date: Fri, 9 Nov 2012 11:44:12 +0000
> Subject: RE: [Chrysler300] Compression pressure , 300H
>
>
>
>
> Thanks for your research Rich,
>
> That's a good write-up on compression testing. One might conclude from 
> that reading that too much emphasis is often put on the results of 
> compression testing and that proper (valid) compression testing is not 
> often accomplished.
>
> Much can be learned about the condition of an engine from studying the 
> results of a valid test, but inaccurate diagnostics are more commonly the 
> main outcome.
>
> My recommendation is to avoid such a test unless you have strong evidence 
> of a problem that can be easily identified by a test. If the engine runs 
> well and performs properly, don't do the testing. You might see results 
> that will cause you undue worries.
>
> Marshall Goodknight, engine failure analyst
>
> Please note: message attached
>
> From: "Rich Barber" <c300@xxxxxxx <mailto:c300%40ez2.net> >
> To: "'Michael Moore'" <mmoore8425@xxxxxxx <mailto:mmoore8425%40aol.com> >,
"'300'" 
> <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> >
> Subject: RE: [Chrysler300] Compression pressure , 300H
> Date: Thu, 8 Nov 2012 22:47:28 -0800
>
> __________________________________________________________
> 7 foods KILL fat
> Surprising foods that boost your metabolism
> http://thirdpartyoffers.juno.com/TGL3131/509cecd8afe166cd830d0st03duc
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> 
>
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx
<mailto:bob%40simplexco.com>  or
> go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
> "Leave Group" button
>
> For list server instructions, go to 
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> For archives go to 
> http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups 
> Links
>
>
>
> 





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.