[Chrysler300] Engine & Tranny Installed

["Mark Schueller" <f41324@xxxxxxxxxxxxx>]

Hi All:

This is indeed a Happy Thanksgiving.  With the help of a couple buddies, we installed the engine and transmission in my 300F this morning without a hitch.  TBTG!.

I can't find torque specs for the crossover frame that supports the rear of the transmission.  (6) 3/4" bolts are used on the frame and (2) 9/16" bolts attach the tranny to the crossover frame.  Does any one know these torques?

Thanks in advance and Happy Thanksgiving to all.

Mark Schueller
300C, F     

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/