[Chrysler300] 300B Power Steering Question

["Jim Ashenmacher" <ashie1@xxxxxxxxxxx>]

Hello to all:

    I had to replace both hoses on power steering pump as they were deteriorated and started leaking,  especially the high pressure hose.    New hoses attached and now the PS system "groans" and makes noise.   Seems to work OK, i.e.,  power steering works.  It was completely free of noise before the hose change.    I suspect air in the system.    I removed top fill cap and drained a little off the reservoir as it was full to top.    I ran the steering wheel side to side at a little above idle speed.    I thought I'd see bubbles or the system trying to purge itself.    No success.   Shop manual doesn't help much.


    Any suggestions or comments would me most appreciated.

    Thank You Kindly
    Jim Ashenmacher
    Rochester, MN

    300B

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/