
Re: [Chrysler300] Torqueflite oil leak
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] Torqueflite oil leak
- From: "Don Verity" <d.verity@xxxxxxx>
- Date: Tue, 28 May 2013 16:12:47 -0400
Not on a cast iron torque flite. It screws into the case as Anton said, and there is no gasket or O-ring.
Don Verity
From: Bob Jasinski
Sent: Tuesday, May 28, 2013 3:31 PM
To: 'Anton Kaare Droenen' ; chrysler300@xxxxxxxxxxxxxxx
Subject: RE: [Chrysler300] Torqueflite oil leak
Anton,
There should be an O ring around the assembly that the gear rides in.
Remove the bolt and pull it out, you should see the O ring and be able to
replace it. Not a difficult job.
Bob J
From: mailto:Chrysler300%40yahoogroups.com [mailto:mailto:Chrysler300%40yahoogroups.com] On
Behalf Of Anton Kaare Droenen
Sent: Tuesday, May 28, 2013 10:48 AM
To: mailto:chrysler300%40yahoogroups.com
Subject: [Chrysler300] Torqueflite oil leak
Hi
I have a oil leak problem on the torqueflite in my G. Seems to come from the
speedometer gear. There is no kind of seal between the gear and the trans
casing. Is it meant to be a seal in between here? Or Is it just meant to be
torqued too the alu casing it sits in?
Hope anyone can tell me :-)
Thanks
Anton D from Norway
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap