[Chrysler300] 300H Fan

[2HsandaHeritage@xxxxxxxxxxx]

Hi Mike, 
The pictures are attached. 
The circle traced by the outer tip of the blades is 18 &1/2 inches. 
However if you measure across the fan thru the centreline of the unit you only get 18 inches since the individual blade tips never line up along a centreline. 
I believe that the 18 & 1/2 inch and 18 inch designations are for the same fan unit. 
The pictures show the fan that was on my 2nd H when I purchased it and the blades are aluminium. 
I read somewhere that the blades on a H should be steel and not aluminium. I have installed fans with steel blades on both of my cars. 
Doug Warrener 
  


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/