Re: [Chrysler300] Oil

I just started my 440 (wrong engine, but a good one for power!) and used "Joe Gibbs break in oil". I has all the needed Zink compounds or whatever it is that needed to be there on break in's. If you don't have it (Zn) your cam will go FLAT quickly. Somehow it imbedes in the surface and helps it last under wear.

Good Luck.

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

From: Jean-Yves <jymopar@xxxxxxxxxxxxxxx>
To: 'Terry Mctaggart' <terrymct999@xxxxxxxxx>
Cc: Chrysler300@xxxxxxxxxxxxxxx
Sent: Friday, March 21, 2014 6:01 PM
Subject: RE: [Chrysler300] Oil

I just had my F engine rebuilt and the engine shop recommends an oil with
sufficient amount of ZDDP, like Valvoline VR1 racing oil.

Jean-Yves Chouinard. ( Spring is officially here, but can't really tell by
looking outside, still tons of snow here in New Brunswick...)

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Terry Mctaggart
Sent: March-21-14 3:17 PM
To: Listserver Chrysler Club
Subject: [Chrysler300] Oil

The first signs of spring are appearing here in Dayton OH, so it's time to
get the 300F out of winter storage and ready for the road. One of the first
things to do is an oil change. Is Rotella still the oil of preference for
our old style engines? Terry McTaggart

[Non-text portions of this message have been removed]

__._,_.___

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use