Re: [Chrysler300] F Dash
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] F Dash





Hello Gloria,

A couple years ago I was told by a person in Finland that the best reproduction dash pads for his 1960 300F came from a reproduction company in Sweden.  He claimed all their products were the best available and very high quality and authenticity.  This is the Swedish webpage for the company:

http://www.autoline.se/index_eu.htm

Back then, there was a U.S. distributor for those pads, but apparently not anymore.  Maybe we have some club members in Europe that could shed more light on the company and their products?  The dash pad in my 300F has some foam disintegrating underneath its original vinyl cover.  So I was considering this Swedish option in my case.

Steve Albu


On Wed, Apr 23, 2014 at 5:00 PM, Gloria Moon <agmoon@xxxxxxxxx> wrote:
 

Has anybody found the right black vinyl grain pattern for an F dash?  If so where?
 
Was it cut and shaped over a jig or just a length of vinyl that had to be custom cut and applied over existing foam padding using glue and a heat gun?
 
How about new foam padding?   Pre-shaped or did it have to be custom cut and applied?
 
Thank you for any information or leads.
 
Allan & Gloria Moon
 




__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.