RE: [Chrysler300] Windshield Wipers

["John Holst jholst@xxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>]

When I replaced the rubber wipers I used an Anco replacement
- Anco U-16R (406 mm). This was just the rubber blade and not the entire
wiper arm. I had to use the original SS insert at the outside ends to get
them to work, but it was just as good as originally intended. They lock
into place and work fine, just slide them into place along the original
SS guides. Should be available at most Auto Parts outlets.

John Holst, 1964 300K...


I found my contact for wipers. Try sales@xxxxxxxxxxxx.
 
Gary
 
 
 
 -----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [ mailto:Chrysler300@xxxxxxxxxxxxxxx]
Sent: Wednesday, May 14, 2014 1:56 PM
To: Terry Mctaggart
Cc: Listserver Chrysler Club
Subject: Re: [Chrysler300] Windshield Wipers

 

Are you looking for refills, or the entire blade frame too?

Keith Boonstra

On Wed, May 14, 2014 at 1:03 PM, Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300] < Chrysler300@xxxxxxxxxxxxxxx> wrote:

 

Does anybody have a source for new blades for our Brutes?  I know you aren't supposed to drive them in the rain, but sometime it just happens!  Terry McTaggart

__._,_.___

---

Posted by: John Holst <jholst@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___